How To Spool A Spinning Reel With Braid While Saving Money And Time [VIDEO]

http://how%20to%20spool%20braid%20on%20a%20spinning%20reel

Want to learn the best way to spool a spinning reel?

There are many ways to do it, including getting a store to do it for you, but I’m going to show you how to do it yourself and avoid the most common mistakes that many anglers make when spooling their reels.

Most of these mistakes can lead to you getting more line twists and wind knots when you’re fishing, so you’re better off doing things the right way from the start.

Watch the video below to learn:

  • How to spool your spinning reel by yourself
  • The common misconceptions to spooling spinning reels (that I believed for many years)
  • How to save money on braided line
  • How much line to put on your reel
  • And much more

Enjoy!

How To Spool A Spinning Reel [VIDEO]

Sign up for FREE to receive the latest saltwater fishing videos, tutorials, product reviews, and fishing product discounts!

➡ Click here to join the Insider Club

Here’s what you need to spool your spinning reel (in addition to the line, rod, and reel):

  • Mono backing line (within 10 lbs of your braid strength is recommended)
  • Scissors
  • A wet towel or washcloth
  • A pencil
  • A narrow cardboard box (or someone to hold the spool)

Now before we get going, you might be asking yourself why mono is on the list if you’re spooling your reel with braid.

Here’s why: braid doesn’t grip into the arbor (the center of the spool), so if you tie braid straight onto it and you have a big fish on, the line might free spin and you could lose your fish.

Monofilament does grip into the arbor, so the best way to combat this is to have a base of mono line on the arbor.

Plus, even the small reels like the 2500 series can hold a LOT of line, so it’s smart to fill up some of the spool with the much less expensive mono line knowing that it’ll likely never see the light of day.

Alright, now let’s get into the steps.

Step 1: Thread the monofilament through the top eye.

Step 2: Tie an arbor knot to connect the mono to the arbor.

Note: This knot isn’t very important because its job is only to start creating friction on the reel’s arbor. None of the “Arbor Knots” are very strong, so you should never let a fish pull the line out all the way down to this knot because you’ll end up losing all of your line out into our waterways… instead, just grab the spool when you realize that you can’t turn the fish so that no more line can go out should palm the spool before a fish takes all of your line out (video lesson on this here)… either your hook will straighten or your line will break at the leader 99% of the time so you’ll at least prevent your line from getting dumped into the water.

Step 3: Set up the spool of mono so that it can spin vertically around a pencil with the help of a friend or simply using a box to hold it as shown in the video.

And a key thing to keep in mind here is that you need to have tension on the line as you’re reeling it in — this will decrease your odds of getting wind knots down the road.

To do this, grip the line with the wet rag and apply pressure to it as you’re reeling in.

Step 4: Tie the mono backing to the braid.

I like to use a double uni knot here (5 turns with the mono and 10 turns with the braid).

Step 5: Reel the braid onto your spool just like you did with the mono backing.

Again, don’t forget to use a wet rag to apply tension on the line as you’re reeling it in.

When the line is about 1/16″ away from the top of the reel, you know you’ve put enough braid on.

If you put too little braid on, you’ll inhibit your casting distance, and if you put too much on, you could be more susceptible to wind knots.

How To Save Money On Braided Fishing Line

There are many benefits of using braid, however, it is considerably more expensive than mono.

Here’s a quick tip to make the most of your line:

Once you’ve spooled your reel, go to a park or beach and walk out 100 yards of it.

Then, walk back to your reel, cut the line, and retie it with a double uni knot with 10 turns on both sides.

Since braid lasts for many years, whenever you need to re-spool, you don’t need to touch the line after the knot.

You’ll only have to put on 100 yards to the top, so if you get a 300-yard spool, that will last you for three re-spools which can save you a lot of money over the years.

Conclusion

spool reel with braided line

Although you could have a store spool your line, by doing it yourself you can make sure that you’re less likely to get line twists or wind knots, and you can set up a system that helps you save money on braid in the long run.

Have any questions about spooling braided line onto your reel?

Do you do it any differently?

Let me know in the comments below!

And if you know someone who needs to learn the best way to spool their line, please TAG or SHARE this with them!

P.S. Want access to our best fishing spots and tips, plus discounts to our online tackle store? Click here to join us in the Insider Club!

Stop Wasting Your Valuable Time On The Water!

Do what the “SMART ANGLERS” are doing and join the Insider Club.

Here’s what you’ll receive today when you join:

  • Weekly fishing reports and TRENDS revealing exactly where you should fish ever trip
  • Weekly “spot dissection” videos that walk you through all the best spots in your area
  • Exclusive fishing tips from the PROS you can’t find anywhere else
  • 20% OFF ALL of your fishing tackle (rods, reels, line, lures, and more from ALL of the biggest brands in America)

Click here to join today.

Related articles:

Related categories:

Subscribe
Notify of
guest

94 Comments
newest
oldest
Inline Feedbacks
View all comments
Donald Belair
1 month ago

Great video, I have reversed it in the past and it seems to work ok. I will now be using this method! Thank you for the great method for spooling your line!

Al Clements
2 months ago

Have you ever reversed the braid after months of use.

Steven Lantry
8 months ago

Just a good review. We need a trick for using the almost empty braid we have left. May put that on next reel just less mono. I have never done a braid to braid knot but looks like with 10 twists it should work. Know I just need an excuse to purchase another new reel.

nikko stabile
9 months ago

why are some reasons you wouldnt want bass pro to spool your reel with the machine ? – thanks

andy j
1 year ago

I just bought a new Penn Fierce III Live Liner 6000 spinning reel which has a rubber gasket around the center of the spool to allow tying braid directly without slipping. Given this, I plan on tying the 300 yards of 50-lb Power Pro Super 8 Slick V2 braid directly to the rubber gasket. Why even use a monofilament backing? (other than mono is less expensive). I plan on adding a 40 lb mono top shot and/or a fluoro leader depending on the situation.

Shelley Hatfield
1 year ago

New to SS insider…
Great Demo- Can you use the same mono base to braid concept on a bait caster reel? Considering the fact they generally don’t hold as much line. Maybe just a few mono wraps then uni to uni knot with the rest braid. Do you still apply the within 10# of each other mono: braid. Thanks in advance.

Rob
1 year ago

Instead of the box method, I put a dowel, long pencil or chopstick through the spool and hold the stick with my toes. The stick goes under the big toe, over the second. Then, You can apply drag with the sides of your feet, directly on the spool. Haven’t had heat issues braking the spool itself. I’ve loaded many reels, even large capacity surf casting reels, this way. Sounds nutty but it works!

Greg Brillant
1 year ago

Excellent refresher on spooling a spinning reel properly. That said, although you’re using the same lb/test line (mono to braid) doesn’t braid really have a higher tensile strength? The follow up is should your reel get stripped down to the mono by a large fish, would there be a better chance of snapping the mono as opposed to the braided line? Should there be more braided line than mono on the reel? Thanks

sava
1 year ago

This is the best guide I’ve found for now. Thank You for sharing this valuable information!

David Strand
1 year ago

I am quite sure I have watched this video before, but I learned something new this time. What I learned was to walk out 100 yds and cut the line. Then tie a double uni knot and spool on the 100 yds. Next season but a 300 yd spool, locate the double uni knot, cut there and put 100 yds of new line each season and have enough for 3 seasons of fishing with fresh braid. I hope I have made sense.

John Crongeyer
1 year ago
Reply to  David Strand

perfect

Paul Shorrock
11 months ago
Reply to  David Strand

or dont walk out 100yds and then cut your nice brand new line and put in a knot which is not as strong as the original line… just go fish. then when your line needs changing…THEN walk out 100 yds and attacch your new line….. DUH!

STOP WASTING TIME ON THE WATER!

Do what the “SMART ANGLERS” are doing and join the Insider Club.

Here’s what you’ll receive today when you join:

Other Fishing Tips You May Like :

2 Reasons To Use Mono Backing With Braided Line

If you put braided line right onto your spinning reel without mono backing, you could risk losing the biggest fish of you life. But putting a base of...
See Full post
39 comments

Weighted vs. Unweighted Popping Corks: Pros & Cons Of Each Style

Want to know which type of popping cork you should use? It depends on the type of fishing you're doing. If you're using live bait, then...
See Full post
2 comments
19
0
Would love your thoughts, please comment.x
()
x

Get Instant Access To “The Inshore Fishing Manifesto” PDF Now

You’ll automatically be emailed a private link to download your PDF, plus you’ll be added to the Salt Strong Newsletter.
(Please double-check your email below to ensure delivery.)